User's Guide

6.30.12.2
Using Permanent Horn and Lights
When and where to use:If Permanent Horn and Lights is enabled, horn and lights will automatically
turn on when the radio powers up.
Procedure:
1 Press the Menu Select button directly below H/L once to turn off the alarm(s).
2 Press the Menu Select button directly below H/L momentarily to enable the last selected
alarm(s).
The display briefly shows the enabled alarms, and then reverts to the selected mode.
6.30.12.3
Changing the Selected Alarms
Procedure:
1 Press the Menu Select button directly below H/L until the display shows the required alarm.
2 Perform one of the following actions:
• Press the Menu Select button directly below H+L to turn on both horn and lights.
• Press the Menu Select button directly below Lgts to turn on the lights.
• Press the Menu Select button directly below Horn to turn on the horn.
One of the following scenarios occurs:
• If you choose H+L, the display shows HORN/LITES ON.
• If you choose LGTS, the display shows LIGHTS ON.
• If you choose HORN, the display shows HORN ON.
An OFF entry is shown at the softkey when one of the alarms is active. Selecting OFF
deactivates the current active alarm.
6.30.12.4
Receiving a Call While Alarms are Turned On
When and where to use:When you receive a call with the Alarms turned on, the vehicle horn sounds
for 4 seconds, and/or the car lights turn on for 60 seconds.
The display shows the type of call received (CALL, PAGE, or PHONE) and the selected mode name.
The time interval can be modified by a qualified radio technician.
6.30.12.5
Turning Off Non-Rearmable External Alarms
Procedure:
1 Perform one of the following actions:
• Press the Menu Select button directly below CALL, PAGE or PHON to turn off the external
alarm(s) and access that feature.
• Press the PTT button or any control-head button to turn off the external alarm(s).
The Volume Knob and the DIM button have no effect on the state of the external alarm(s).
6875947M01-HP
Chapter 6: Advanced Features
112