User's Guide
Table Of Contents
- Contents
- List of Tables
- Software Version
- Read Me First
- Preparing Your Radio for Use
- Radio Controls
- Status Indicators
- General Radio Operation
- Advanced Features
- 6.1 ViQi
- 6.2 Advanced Call Features
- 6.3 Remote Monitor
- 6.4 Contacts
- 6.5 Scan Lists
- 6.6 Scan
- 6.6.1 Turning Scan On or Off
- 6.6.2 Turning Scan On While Disregarding the Squelch Code (Conventional Channels Only)
- 6.6.3 Deleting a Nuisance Channel
- 6.6.4 Restoring a Nuisance Channel
- 6.6.5 Changing Priorities Status While Scan is On
- 6.6.6 Restoring Priorities in a Scan List
- 6.6.7 Using the Hang Up Box (HUB)
- 6.7 Call Alert Paging
- 6.8 Recent Calls
- 6.9 In-Call User Alert
- 6.10 Quick Call II
- 6.11 Emergency Operation
- 6.11.1 Special Considerations for Emergency Operation
- 6.11.2 Emergency Keep-Alive
- 6.11.3 Exiting Emergency Operation
- 6.11.4 Exiting Emergency as Supervisor (Trunking Only)
- 6.11.5 Sending an Emergency Alarm
- 6.11.6 Sending an Emergency Call (Trunking Only)
- 6.11.7 Sending An Emergency Call With Hot Mic (Trunking Only)
- 6.11.8 Sending an Emergency Alarm with Emergency Call
- 6.11.9 Sending An Emergency Alarm and Call with Hot Mic
- 6.11.10 Sending a Silent Emergency Alarm
- 6.11.11 Impact Detection
- 6.12 Sending Evacuation Tone
- 6.13 Automatic Registration Service
- 6.14 Text Messaging Service
- 6.14.1 Accessing the Messaging Features
- 6.14.2 Composing and Sending a New Text Message
- 6.14.3 Sending a Quick Text Message
- 6.14.4 Priority Status and Request Reply of a New Text Message
- 6.14.4.1 Appending a Priority Status to a Text Message
- 6.14.4.2 Removing a Priority Status from a Text Message
- 6.14.4.3 Appending a Request Reply to a Text Message
- 6.14.4.4 Removing a Request Reply from a Text Message
- 6.14.4.5 Appending a Priority Status and a Reply Request to a Text Message
- 6.14.4.6 Removing a Priority Status and a Reply Request from a Text Message
- 6.14.4.7 Receiving a Text Message
- 6.14.4.8 Viewing a Text Message from the Inbox
- 6.14.4.9 Replying to a Received Text Message
- 6.14.4.10 Accessing the Drafts Folder
- 6.14.4.11 Sent Text Messages
- 6.14.4.12 Deleting Text Messages
- 6.15 Secure Operations
- 6.16 Radio Lock
- 6.17 Radio Stun and Kill
- 6.18 Radio Inhibit
- 6.19 Global Positioning System/Global Navigation Satellite System
- 6.19.1 GPS Performance Enhancement
- 6.19.2 The Outdoor Location Feature (Using GPS)
- 6.19.3 Location Format
- 6.19.4 Accessing the Outdoor Location Feature
- 6.19.5 Turning Off GPS
- 6.19.6 Saving a Waypoint
- 6.19.7 Viewing a Saved Waypoint
- 6.19.8 Editing the Alias of a Waypoint
- 6.19.9 Editing the Coordinates of a Waypoint
- 6.19.10 Deleting a Single Saved Waypoint
- 6.19.11 Deleting All Saved Waypoints
- 6.19.12 Measuring the Distance and Bearing from a Saved Waypoint
- 6.19.13 Location Feature in Emergency Mode
- 6.19.14 Peer-Location on the Display (ASTRO Conventional)
- 6.20 Mission Critical Geofence (ASTRO 25 Trunking)
- 6.21 Trunking System Controls
- 6.22 Ignition Switch Options
- 6.23 ASTRO 25 (P25) Programming Over Project 25 (POP25)
- 6.24 Voice Announcement
- 6.25 Site Selectable Alerts (ASTRO 25 Trunking)
- 6.25.1 Sending SSA Notification to Single Site
- 6.25.2 Sending SSA Notification to Single Site by Manual Entry
- 6.25.3 Sending SSA Notification to All Sites
- 6.25.4 Sending SSA Notification to All Available Sites
- 6.25.5 Stopping SSA Notification of a Single Site
- 6.25.6 Stopping SSA Notification of a Single Site by Manual Entry
- 6.25.7 Stopping SSA Notification of All Sites
- 6.25.8 Stopping SSA Notification of All Available Sites
- 6.26 Channel Change on Off-Hook
- 6.27 Low Voltage Threshold Warning
- 6.28 Wi-Fi
- 6.29 Utilities
- 6.29.1 Selecting the Power Level
- 6.29.2 Selecting a Radio Profile
- 6.29.3 Controlling the Display Backlight
- 6.29.4 Turning the Keypad Tones On or Off
- 6.29.5 Turning Voice Mute On or Off
- 6.29.6 Using the Time-Out Timer
- 6.29.7 Conventional Squelch Operation
- 6.29.8 Using the PL Defeat Feature
- 6.29.9 Digital PTT ID Support
- 6.29.10 Smart PTT (Conventional Only)
- 6.29.11 Transmit Inhibit
- 6.29.12 External Alarms (Horn and Lights)
- 6.29.13 Front Panel Programming
- Accessories
- Legal and Compliance Statements
- Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
- Glossary
- ACK
- Active Channel
- Analog Signal
- ARS
- ASTRO 25
- ASTRO conventional
- Autoscan
- AUX CH
- Call Alert
- Carrier Squelch
- Central Controller
- Channel
- Control Channel
- Conventional
- Conventional Scan List
- Cursor
- Deadlock
- Digital Private Line (DPL)
- Digital Signal
- Dispatcher
- Digital Signal Processor
- Dynamic Regrouping
- DVRS
- ESN
- Failsoft
- FCC
- Hang up
- IV&D
- Key Variable Loader
- Liquid-Crystal Display (LCD)
- Light Emitting Diode (LED)
- MCHB
- MDC
- Menu Entry
- Monitor
- Multi-System Talkgroup Scan List
- Network Access Code
- Non-tactical/revert
- Over-The-Air Rekeying
- Page
- Personality
- PIN
- Preprogrammed
- Private (Conversation) Call
- Private Line (PL)
- Programmable
- Push-to-Talk
- Radio Frequency
- Repeater
- Selective Call
- selective switch
- Squelch
- Synchronous Serial Interface (SSI)
- Standby
- Status Calls
- Tactical/non-revert
- TalkAround
- Talkgroup
- TMS
- Trunking
- Trunking Priority Monitor scan list
- USK
- UTC
- VRS
- Zone
• If you choose to delay, a configuration data upgrade is installed automatically at the next power up.
However, in the case of a firmware upgrade, the radio prompts Upgrade? again at the next power
up.
• If you choose to reject, the display shows Upg Aborted. The radio continues to function with the
current configuration until it gets reprogrammed.
NOTICE: If your radio has problems upgrading over-the-air, consult a qualified technician for
details.
6.24
Voice Announcement
This feature enables the radio to audibly indicate the current feature mode, zone, or channel assigned
to the user.
The available voice announcement priority options are:
High
Voice announcement is enabled even when the radio is receiving calls.
Low
Voice announcement is disabled when the radio is receiving calls.
6.25
Site Selectable Alerts (ASTRO 25 Trunking)
A Site Selectable Alert (SSA) is an Intelligent Lighting indicator with audio alert sent to radios at sites to
notify the users when there is a special situation that they need to be aware of.
Your radio supports up to 250 site aliases. Only authorized radios are enabled to send SSA.
NOTICE:
The alert alias, alert tone, and alert period is configured in the Customer Programming
Software. Contact your system administrator for more information.
When mixing SSA with received voice audio, the SSA alert is reduced in volume to ensure that
the voice message is still heard clearly. It is important that the SSA audio files are created with
clear loud audio to ensure audio clarity at reduced levels.
6.25.1
Sending SSA Notification to Single Site
Procedure:
1
or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Start Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4
or to the desired Site Alias. Press the Menu Select button directly below Sel.
The display shows the Select Alert screen.
5 or to select the desired Alert Alias and press the Menu Select button directly below Send.
The display shows Sending req.
68012006035-EP
Chapter 6: Advanced Features
97