User's Guide

The killed radio can only be recovered with a special device. Consult an authorized and qualified
technician for details.
6.17.2.1
Using Remote Kill to Kill Another Radio
When and where to use:Remote Kill allows you to render another radio inoperable by sending an
over-the-air command using the menu on your radio.
Procedure:
1
or to Kill.
2 Press the Menu Select button directly below Kill.
The display shows Enter Password.
3 Use the keypad to enter your Tactical Inhibit Encode Password.
4 Press the Menu Select button directly below OK .
The display shows the radio Contact IDs.
5 Perform one of the following actions:
•
or to the required ID.
• Press the Menu Select button directly below LNum to go to the last number dialed.
• Use the keypad to enter the required ID.
• Press the Menu Select button directly below Send to initiate command.
If the receiving radio received the command, your radio display shows Ack received.
If the receiving radio does not have encryption key to decrypt the received encrypted command,
your radio display shows Dec fail.
If the receiving radio is powered off or already killed, your radio display shows No Ack.
Once the receiving radio received the command, its screen turns blank, the killed radio is inoperable.
6.17.2.2
Using Direct Kill to Kill Your Own Radio
When and where to use:Direct Kill allows you to make your own radio inoperable.
Procedure:
Press and hold the programmable button (2-dot) on the keypad microphone then press the
Orange button until the display turns blank and becomes inoperable.
68012006035-EP
Chapter 6: Advanced Features
83