User's Guide

6.11.11.2
Exiting Impact Detected Condition
When and where to use:If there is a false alarm or you do not want to enter into Emergency mode,
you can exit the Impact Detected condition and prevent emergency from going off. Returning to normal
operations resets the Impact Detected condition.
Procedure:
Perform one of the following actions:
• Press the preprogrammed Clear button to exit.
• Press the Menu Select button below Clr to exit.
6.12
Sending Evacuation Tone
This feature enables the evacuation tone to be heard on the transmitting radio and on any radio that is
able to receive the tone instruction.
Procedure:
Press and hold the PTT button on the radio keypad mic and short press the Orange button on
the radio control head.
Once the tone begins to sound, if the orange button is released the tone continues to alarm on all
radios within the talkgroup, until the PTT button is released.
NOTICE: Radio does not transmit evacuation tone if the radio is in secure mode.
6.13
Automatic Registration Service
Automatic Registration Service (ARS) provides an automated data application registration for the radio.
When you turn on the radio, the device automatically registers with the server. Data applications within
the fixed network determine the presence of a device on the system and send data to the device.
The ARS for the radio consists of two modes:
• ARS Server Mode (default mode)
• ARS Non-server Mode
6.13.1
Selecting or Changing the ARS Mode
When and where to use:
The following methods are options on how to select or change the ARS Mode. The result of all the
methods is the same. You can use the options interchangeably depending on your preference and the
programmed functions.
Procedure:
• Selecting or Changing the ARS mode using the radio menu:
a. Press and hold
or to Chan .
b. Press the Menu Select button directly below Chan .
The display shows the current channel name.
68012006035-EP
Chapter 6: Advanced Features
65