User's Guide
Table Of Contents
- Contents
- List of Tables
- Software Version
- Read Me First
- Preparing Your Radio for Use
- Radio Controls
- Status Indicators
- General Radio Operation
- Advanced Features
- 6.1 ViQi
- 6.2 Advanced Call Features
- 6.3 Remote Monitor
- 6.4 Contacts
- 6.5 Scan Lists
- 6.6 Scan
- 6.6.1 Turning Scan On or Off
- 6.6.2 Turning Scan On While Disregarding the Squelch Code (Conventional Channels Only)
- 6.6.3 Deleting a Nuisance Channel
- 6.6.4 Restoring a Nuisance Channel
- 6.6.5 Changing Priorities Status While Scan is On
- 6.6.6 Restoring Priorities in a Scan List
- 6.6.7 Using the Hang Up Box (HUB)
- 6.7 Call Alert Paging
- 6.8 Recent Calls
- 6.9 In-Call User Alert
- 6.10 Quick Call II
- 6.11 Emergency Operation
- 6.11.1 Special Considerations for Emergency Operation
- 6.11.2 Emergency Keep-Alive
- 6.11.3 Exiting Emergency Operation
- 6.11.4 Exiting Emergency as Supervisor (Trunking Only)
- 6.11.5 Sending an Emergency Alarm
- 6.11.6 Sending an Emergency Call (Trunking Only)
- 6.11.7 Sending An Emergency Call With Hot Mic (Trunking Only)
- 6.11.8 Sending an Emergency Alarm with Emergency Call
- 6.11.9 Sending An Emergency Alarm and Call with Hot Mic
- 6.11.10 Sending a Silent Emergency Alarm
- 6.11.11 Impact Detection
- 6.12 Sending Evacuation Tone
- 6.13 Automatic Registration Service
- 6.14 Text Messaging Service
- 6.14.1 Accessing the Messaging Features
- 6.14.2 Composing and Sending a New Text Message
- 6.14.3 Sending a Quick Text Message
- 6.14.4 Priority Status and Request Reply of a New Text Message
- 6.14.4.1 Appending a Priority Status to a Text Message
- 6.14.4.2 Removing a Priority Status from a Text Message
- 6.14.4.3 Appending a Request Reply to a Text Message
- 6.14.4.4 Removing a Request Reply from a Text Message
- 6.14.4.5 Appending a Priority Status and a Reply Request to a Text Message
- 6.14.4.6 Removing a Priority Status and a Reply Request from a Text Message
- 6.14.4.7 Receiving a Text Message
- 6.14.4.8 Viewing a Text Message from the Inbox
- 6.14.4.9 Replying to a Received Text Message
- 6.14.4.10 Accessing the Drafts Folder
- 6.14.4.11 Sent Text Messages
- 6.14.4.12 Deleting Text Messages
- 6.15 Secure Operations
- 6.16 Radio Lock
- 6.17 Radio Stun and Kill
- 6.18 Radio Inhibit
- 6.19 Global Positioning System/Global Navigation Satellite System
- 6.19.1 GPS Performance Enhancement
- 6.19.2 The Outdoor Location Feature (Using GPS)
- 6.19.3 Location Format
- 6.19.4 Accessing the Outdoor Location Feature
- 6.19.5 Turning Off GPS
- 6.19.6 Saving a Waypoint
- 6.19.7 Viewing a Saved Waypoint
- 6.19.8 Editing the Alias of a Waypoint
- 6.19.9 Editing the Coordinates of a Waypoint
- 6.19.10 Deleting a Single Saved Waypoint
- 6.19.11 Deleting All Saved Waypoints
- 6.19.12 Measuring the Distance and Bearing from a Saved Waypoint
- 6.19.13 Location Feature in Emergency Mode
- 6.19.14 Peer-Location on the Display (ASTRO Conventional)
- 6.20 Mission Critical Geofence (ASTRO 25 Trunking)
- 6.21 Trunking System Controls
- 6.22 Ignition Switch Options
- 6.23 ASTRO 25 (P25) Programming Over Project 25 (POP25)
- 6.24 Voice Announcement
- 6.25 Site Selectable Alerts (ASTRO 25 Trunking)
- 6.25.1 Sending SSA Notification to Single Site
- 6.25.2 Sending SSA Notification to Single Site by Manual Entry
- 6.25.3 Sending SSA Notification to All Sites
- 6.25.4 Sending SSA Notification to All Available Sites
- 6.25.5 Stopping SSA Notification of a Single Site
- 6.25.6 Stopping SSA Notification of a Single Site by Manual Entry
- 6.25.7 Stopping SSA Notification of All Sites
- 6.25.8 Stopping SSA Notification of All Available Sites
- 6.26 Channel Change on Off-Hook
- 6.27 Low Voltage Threshold Warning
- 6.28 Wi-Fi
- 6.29 Utilities
- 6.29.1 Selecting the Power Level
- 6.29.2 Selecting a Radio Profile
- 6.29.3 Controlling the Display Backlight
- 6.29.4 Turning the Keypad Tones On or Off
- 6.29.5 Turning Voice Mute On or Off
- 6.29.6 Using the Time-Out Timer
- 6.29.7 Conventional Squelch Operation
- 6.29.8 Using the PL Defeat Feature
- 6.29.9 Digital PTT ID Support
- 6.29.10 Smart PTT (Conventional Only)
- 6.29.11 Transmit Inhibit
- 6.29.12 External Alarms (Horn and Lights)
- 6.29.13 Front Panel Programming
- Accessories
- Legal and Compliance Statements
- Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
- Glossary
- ACK
- Active Channel
- Analog Signal
- ARS
- ASTRO 25
- ASTRO conventional
- Autoscan
- AUX CH
- Call Alert
- Carrier Squelch
- Central Controller
- Channel
- Control Channel
- Conventional
- Conventional Scan List
- Cursor
- Deadlock
- Digital Private Line (DPL)
- Digital Signal
- Dispatcher
- Digital Signal Processor
- Dynamic Regrouping
- DVRS
- ESN
- Failsoft
- FCC
- Hang up
- IV&D
- Key Variable Loader
- Liquid-Crystal Display (LCD)
- Light Emitting Diode (LED)
- MCHB
- MDC
- Menu Entry
- Monitor
- Multi-System Talkgroup Scan List
- Network Access Code
- Non-tactical/revert
- Over-The-Air Rekeying
- Page
- Personality
- PIN
- Preprogrammed
- Private (Conversation) Call
- Private Line (PL)
- Programmable
- Push-to-Talk
- Radio Frequency
- Repeater
- Selective Call
- selective switch
- Squelch
- Synchronous Serial Interface (SSI)
- Standby
- Status Calls
- Tactical/non-revert
- TalkAround
- Talkgroup
- TMS
- Trunking
- Trunking Priority Monitor scan list
- USK
- UTC
- VRS
- Zone
• Playback the saved calls using the preprogrammed Record Playback button:
a. Short press the preprogrammed Record Playback button to playback the saved calls.
b. Short press the preprogrammed Record Playback button again to skip to the next saved
call. If there is only a single saved call, the playback skips to the end of the call.
Radio auto playback the most recent incoming call followed by saved calls in chronological
order.
Radio displays the playback status.
NOTICE:
Received call overwrites the ongoing record playback. User can short press the
programmable button within three seconds to continue the playback and ignore the
receiving call.
User can short press the programmable button to trigger playback when the radio is
receiving call to overwrite the receiving call.
Playback can be halted by any tone and button press except for specific buttons. Check
with your dealer or system administrator for more information.
6.9
In-Call User Alert
This feature allows the radio to remain muted to affiliated talkgroup calls or dispatch calls while
operating on the current Trunking Personality or conventional channel respectively.
Group and individual Pages unmute the radio for the alert tone to sound. The radio also unmutes to
individual radio-to-radio calls. This feature is very useful when a radio-user prefers to not hear affiliated
talkgroup or dispatch calls traffic, but needs-to remain in radio contact. For an In-Call User Alert
enabled channel, the Voice Mute button-press or the Voice Mute menu-selection allows the radio-user
to toggle on and off Voice Mute functionality.
6.9.1
Enabling and Disabling In-Call User Alert
This feature allows you to mute the voice transmission of the current zone and channel.
Prerequisites:Make sure you are in Home mode where the default zone and mode are being
displayed.
Procedure:
1
or to scroll to the VMut and press the Menu Select button directly below VMut.
Voice transmission is muted.
2 To turn off the feature, press the Menu Select button directly below VMut or the VMut
preprogrammed button again.
Pressing the Menu Select button directly below VMut or the VMut programmed button
momentarily toggles between Voice mute on and Voice mute off. Voice mute on shown on
the display indicates that the radio is muted to all conventional dispatch calls and affiliated
trunking group calls.
68012006035-EP
Chapter 6: Advanced Features
58