User's Guide

a. or to Call .
b. Press the Menu Select button directly below Call .
c.
or to select the alias or ID, and press the PTT button to initiate the call.
If the target radio does not respond after a preprogrammed period, the display shows Send
page?.
d. To send the call alert page, press the Menu Select button directly below Yes . To exit the
screen without sending the call alert page, press the Menu Select button directly below No .
The display shows Paging...<Alias>.
If the call alert page is sent successfully, you hear four high-pitched tones and the display
shows Ack received. The radio returns to the Home screen.
If the call alert page is not acknowledged, you hear a low tone and the display shows No
acknowledge. Press the Menu Select button directly below OK to return to the main screen
of Contacts.
6.8
Recent Calls
Recent call menu allows you to view the recent incoming and outgoing call information.
You can view the information of the following type of calls:
• Call Alert
• Selective Call
• Private Call
• Phone Call (Outgoing Only)
• Emergency Call (Incoming Only)
NOTICE: The Log Dispatch Calls Enable field need to be enabled in CPS for your radio to log
the dispatch call.
6.8.1
Viewing Recent Calls
Procedure:
• Viewing recent calls using the radio menu:
a. or to Rcnt.
b. Press the Menu Select button directly below Rcnt to access the Recent Calls feature
screen.
c.
or to scroll through the list.
d. To view the recent Emergency calls, press the Menu Select button directly below Emer.
Press the Menu Select button directly below All to view back all recent calls.
e. To return to the Home screen, press the Menu Select button directly below Back, , or the
PTT button.
68012006035-EP
Chapter 6: Advanced Features
56