User's Guide

If you have selected Exit without selecting any Dynamic Zone Channels list, the display returns
to Home screen without any changes.
6.2.7.2
Saving a Channel in the Dynamic Zone from List Selection
Prerequisites:To perform this operation, the radio must be in the Dynamic Zone.
Procedure:
1
or to ZnPr. Press the Menu Select button directly below ZnPr to enter the Program Zone
screen.
2 Press the Menu Select button directly below Edit.
The display shows Search Options screen.
3 or to List Selection. Press the Menu Select button directly below Sel .
The display shows Select Zone screen.
4
or to the required zone. Press the Menu Select button directly below Sel .
The display shows Select Chan screen.
5 or to the required channel. Press the Menu Select button directly below Sel .
The display shows Channel updated.
6 Press the Menu Select button directly below Exit to return to Home screen.
6.2.7.3
Deleting a Channel in the Dynamic Zone
Prerequisites:To perform this operation, the radio must be in the Dynamic Zone.
Procedure:
1
or to ZnPr then press the Menu Select button directly below ZnPr to enter Program Zone
screen.
The display shows the dynamic channels list.
2
or to the saved dynamic channel then press the Menu Select button directly below Del.
The display shows Channel deleted screen.
3 Press the Menu Select button below Exit to return to Home screen.
The Home screen shows <Dynamic Zone Channels>.
If the channel deleted is the Home channel, the Home screen shows <Zone Name>“Blank”.
6.3
Remote Monitor
This feature allows the system administrator to turn on the microphone of a targeted radio with a
subscriber alias or ID.
When remote monitor feature is activated, the audio transmission can be configured in CPS to route
the audio to the radio internal microphone, wired RSM microphone, or Bluetooth wireless microphone.
68012006035-EP
Chapter 6: Advanced Features
46