User's Guide

Query Examples
"Can I get my exact location?"
"Am I still at the <Location>?"
NOTICE: ViQi will ask for more information to complete the
query.
Target Location "Where is <Unit Name>?
"Tell me where <Unit Name> is.
NOTICE: ViQi will ask for more information to complete the
query.
6.1.1
Using ViQi Virtual Partner
Prerequisites:See ViQi on page 40 for the queries supported by this feature. To perform queries you
are required to log in to CommandCentral. See Logging In to CommandCentral (Subsequent Login).
Procedure:
1 Press and hold the assigned ViQi button.
2 After you hear a tone, speak your request into the microphone.
3 Release the assigned programmable button and wait for ViQi to respond.
4 Throughout your session, repeat steps step 1 through step 3 when responding to ViQi.
Depending on your query, you can also say the following requests:
• To play the available results, say "Play results".
• To request for more details, say "More details".
• To complete the Virtual Partner session, say "Complete".
6.2
Advanced Call Features
This chapter explains the operations of the call features available in your radio.
6.2.1
Calling a Phone Not in the List
Procedure:
1
or to Phon.
2 Press the Menu Select button directly below Phon.
3 Enter the desired phone number on the keypad.
The display updates as the numbers are entered.
4 Press the button or the PTT button on the keypad microphone to make the call.
5 Press and hold the PTT button to talk. Release the PTT button to listen.
6 Press or Menu Select button directly below Phon to exit.
68012006035-EP
Chapter 6: Advanced Features
41