User's Guide

Name, Zone Name, Top Chan Name and Top Zone Name the or buttons increment or decrement
the selected value by scrolling through the valid entries.
Procedure:
1 Perform the following actions based on the type of the parameter:
Table 9: Parameter Editing Keys
Parameter Editing Keys Value
Tx Perform one of the following:
• or to increment entry and to move cursor.
• Use keypad to directly enter the desired value.
Rx
Tx PL Perform one of the following:
• or to increment entry and to move cursor.
• Use keypad to directly enter the desired value.
DEL to delete the parameter value of PL entered.
In addition, for Tx DPL and Rx DPL, the INVT softkey switches INVERT on
and off.
Rx PL
Tx DPL
Rx DPL
Tx NAC
or to increment or decrement entry and to move cursor within parameter
value.
Use keypad to enter hexadecimal numbers:
• Plus, multiple press 2 to scroll through A, B, C, 2.
• Plus, multiple press 3 to scroll through D, E, F, 3.
Rx NAC
Rx Type Perform one of the following:
• or to toggle between valid entries.
• Press the keypad digits for quick access to locations in
the list.
ANALOG/
DIGITAL/
MIXED
Tx Type ANALOG/
DIGITAL
Bandwidth 25kHz/
20kHz/
12.5kHz
Protect ON/OFF
Tx Deviation 5.0 kHz/4.0
kHz/2.5 kHz
Power Level High/Low
Hot Keypad ON/OFF
Busy LED ON/OFF
Low Batt
LED
ON/OFF
MPL Enable Disabled/Rx
/Tx/All
68012006035-EP
Chapter 6: Advanced Features
114