User's Guide

6.29.13.3
Selecting a Channel within a Zone
Procedure:
1 Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2 Enter the password and press the Menu Select button directly below Ok.
3 Press
or to select Zn/Ch.
4 Press or to select the required zone and press SEL to view the channels.
5 Press or to select the required channel and press SEL to access the channel parameter.
The radio displays the channel parameter screen.
6 Press or to select the required channel parameter.
6.29.13.4
Changing a Channel Parameter
Procedure:
1 Press
or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2 Enter the password and press the Menu Select button directly below Ok.
3 or to scroll through the various information.
4 Press EDIT to edit the channel parameter.
5 Change the parameter value.
6 Press OK to accept the parameter change and return to view mode.
7 Perform one of the following actions and proceed to the next step:
• or to select other channel parameters.
• Press BACK to access a different channel and make any necessary programming changes.
8 Press BACK to return to Zone List Selector.
9 Press BACK to return to FPP main menu.
10 Press
to return to the Home screen.
6.29.13.5
Editing Parameters
When and where to use:Use the keypad to enter the numeric digits. Each key can generate different
characters of the alphabet through multiple presses of the same key. For all parameters except Chan
68012006035-EP
Chapter 6: Advanced Features
113