User's Guide
Table Of Contents
- Contents
- List of Tables
- Software Version
- Read Me First
- Preparing Your Radio for Use
- Radio Controls
- Status Indicators
- General Radio Operation
- Advanced Features
- 6.1 ViQi
- 6.2 Advanced Call Features
- 6.3 Remote Monitor
- 6.4 Contacts
- 6.5 Scan Lists
- 6.6 Scan
- 6.6.1 Turning Scan On or Off
- 6.6.2 Turning Scan On While Disregarding the Squelch Code (Conventional Channels Only)
- 6.6.3 Deleting a Nuisance Channel
- 6.6.4 Restoring a Nuisance Channel
- 6.6.5 Changing Priorities Status While Scan is On
- 6.6.6 Restoring Priorities in a Scan List
- 6.6.7 Using the Hang Up Box (HUB)
- 6.7 Call Alert Paging
- 6.8 Recent Calls
- 6.9 In-Call User Alert
- 6.10 Quick Call II
- 6.11 Emergency Operation
- 6.11.1 Special Considerations for Emergency Operation
- 6.11.2 Emergency Keep-Alive
- 6.11.3 Exiting Emergency Operation
- 6.11.4 Exiting Emergency as Supervisor (Trunking Only)
- 6.11.5 Sending an Emergency Alarm
- 6.11.6 Sending an Emergency Call (Trunking Only)
- 6.11.7 Sending An Emergency Call With Hot Mic (Trunking Only)
- 6.11.8 Sending an Emergency Alarm with Emergency Call
- 6.11.9 Sending An Emergency Alarm and Call with Hot Mic
- 6.11.10 Sending a Silent Emergency Alarm
- 6.11.11 Impact Detection
- 6.12 Sending Evacuation Tone
- 6.13 Automatic Registration Service
- 6.14 Text Messaging Service
- 6.14.1 Accessing the Messaging Features
- 6.14.2 Composing and Sending a New Text Message
- 6.14.3 Sending a Quick Text Message
- 6.14.4 Priority Status and Request Reply of a New Text Message
- 6.14.4.1 Appending a Priority Status to a Text Message
- 6.14.4.2 Removing a Priority Status from a Text Message
- 6.14.4.3 Appending a Request Reply to a Text Message
- 6.14.4.4 Removing a Request Reply from a Text Message
- 6.14.4.5 Appending a Priority Status and a Reply Request to a Text Message
- 6.14.4.6 Removing a Priority Status and a Reply Request from a Text Message
- 6.14.4.7 Receiving a Text Message
- 6.14.4.8 Viewing a Text Message from the Inbox
- 6.14.4.9 Replying to a Received Text Message
- 6.14.4.10 Accessing the Drafts Folder
- 6.14.4.11 Sent Text Messages
- 6.14.4.12 Deleting Text Messages
- 6.15 Secure Operations
- 6.16 Radio Lock
- 6.17 Radio Stun and Kill
- 6.18 Radio Inhibit
- 6.19 Global Positioning System/Global Navigation Satellite System
- 6.19.1 GPS Performance Enhancement
- 6.19.2 The Outdoor Location Feature (Using GPS)
- 6.19.3 Location Format
- 6.19.4 Accessing the Outdoor Location Feature
- 6.19.5 Turning Off GPS
- 6.19.6 Saving a Waypoint
- 6.19.7 Viewing a Saved Waypoint
- 6.19.8 Editing the Alias of a Waypoint
- 6.19.9 Editing the Coordinates of a Waypoint
- 6.19.10 Deleting a Single Saved Waypoint
- 6.19.11 Deleting All Saved Waypoints
- 6.19.12 Measuring the Distance and Bearing from a Saved Waypoint
- 6.19.13 Location Feature in Emergency Mode
- 6.19.14 Peer-Location on the Display (ASTRO Conventional)
- 6.20 Mission Critical Geofence (ASTRO 25 Trunking)
- 6.21 Trunking System Controls
- 6.22 Ignition Switch Options
- 6.23 ASTRO 25 (P25) Programming Over Project 25 (POP25)
- 6.24 Voice Announcement
- 6.25 Site Selectable Alerts (ASTRO 25 Trunking)
- 6.25.1 Sending SSA Notification to Single Site
- 6.25.2 Sending SSA Notification to Single Site by Manual Entry
- 6.25.3 Sending SSA Notification to All Sites
- 6.25.4 Sending SSA Notification to All Available Sites
- 6.25.5 Stopping SSA Notification of a Single Site
- 6.25.6 Stopping SSA Notification of a Single Site by Manual Entry
- 6.25.7 Stopping SSA Notification of All Sites
- 6.25.8 Stopping SSA Notification of All Available Sites
- 6.26 Channel Change on Off-Hook
- 6.27 Low Voltage Threshold Warning
- 6.28 Wi-Fi
- 6.29 Utilities
- 6.29.1 Selecting the Power Level
- 6.29.2 Selecting a Radio Profile
- 6.29.3 Controlling the Display Backlight
- 6.29.4 Turning the Keypad Tones On or Off
- 6.29.5 Turning Voice Mute On or Off
- 6.29.6 Using the Time-Out Timer
- 6.29.7 Conventional Squelch Operation
- 6.29.8 Using the PL Defeat Feature
- 6.29.9 Digital PTT ID Support
- 6.29.10 Smart PTT (Conventional Only)
- 6.29.11 Transmit Inhibit
- 6.29.12 External Alarms (Horn and Lights)
- 6.29.13 Front Panel Programming
- Accessories
- Legal and Compliance Statements
- Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
- Glossary
- ACK
- Active Channel
- Analog Signal
- ARS
- ASTRO 25
- ASTRO conventional
- Autoscan
- AUX CH
- Call Alert
- Carrier Squelch
- Central Controller
- Channel
- CHIB
- Control Channel
- Conventional
- Conventional Scan List
- Cursor
- Deadlock
- Digital Private Line (DPL)
- Digital Signal
- Dispatcher
- Digital Signal Processor
- Dynamic Regrouping
- DVRS
- ESN
- Failsoft
- FCC
- Hang up
- Key Variable Loader
- Liquid-Crystal Display (LCD)
- Light Emitting Diode (LED)
- MCHB
- MDC
- Menu Entry
- Monitor
- Multi-System Talkgroup Scan List
- Network Access Code
- Non-tactical/revert
- Over-The-Air Rekeying
- Page
- Personality
- PIN
- Preprogrammed
- Private (Conversation) Call
- Private Line (PL)
- Programmable
- Push-to-Talk
- Radio Frequency
- Repeater
- Selective Call
- selective switch
- Squelch
- Synchronous Serial Interface (SSI)
- Standby
- Status Calls
- Tactical/non-revert
- TalkAround
- Talkgroup
- TMS
- Trunking
- Trunking Priority Monitor scan list
- USK
- UTC
- VRS
- Zone
Procedure:
1 or to scroll to the VMut and press the Menu Select button directly below VMut.
Voice transmission is muted.
2 To turn off the feature, press the Menu Select button directly below VMut or the VMut
preprogrammed button again.
Pressing the Menu Select button directly below VMut or the VMut programmed button
momentarily toggles between Voice mute on and Voice mute off. Voice mute on shown on
the display indicates that the radio is muted to all conventional dispatch calls and affiliated
trunking group calls.
6.10
Quick Call II
This feature allows you to broadcast a series of distinct, recognizable tones before a voice
transmission from the dispatcher or a radio.
The broadcasting dispatcher or radio user can select this pre-programmed Quick Call II tone
transmission to be sent to an individual talkgroup or over the entire system. Each tone is distinctive to
indicate different situation or different broadcaster.
NOTICE: The receiving radio must be configured with the matching Quick Call II tone from the
transmitting radio, in order for the receiving radio to sound the selected tone followed by the
pre-configured alert tone.
6.10.1
Initiating a Quick Call II Transmission
Prerequisites:The broadcasting or transmitting radio must be pre-programmed to see the tone in the
Quick Call II tone list. The receiving radio must also be pre-programmed to decode the tone to
broadcast.
Procedure:
1 or to QCII, and press the Menu Select button directly below QCII.
2 or to select the tone to broadcast.
3 Press the PTT to broadcast the selected tone, or press and hold the PTT to broadcast the
selected tone and transmit with your vocal transmission.
You hear the radio sounds the selected tone. You can begin your call after the tone ends.
4 Release PTT to listen.
6.11
Emergency Operation
The Emergency feature is used to indicate a critical situation. An emergency signal overrides any other
communication over the selected channel.
Your radio supports the following Emergency modes:
• Emergency Alarm
• Emergency Call
6875946M01-JP
Chapter 6: Advanced Features
58