User's Guide

When and where to use:
When you receive a Private Call, you hear two alert tones and the LED blinks green.
Procedure:
1 Press the Menu Select button directly below Resp within 20 seconds after the call indicators
begin.
If the caller alias is in the call list, the display shows the caller alias during the call.
If the caller name is not in the call list, the display shows the caller ID.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
3 Press to hang up and return to the Home screen.
NOTICE: If you press the PTT button before pressing the Menu Select button directly below
Resp, your conversation is broadcasted to all members of the talkgroup.
If 20 seconds pass before you press the Menu Select button directly below Resp, you are not
responding privately to the call. Instead, you initiate a Private Call.
5.5.3
Receiving and Responding to a Telephone Call (Trunking Only)
This feature allows you to receive calls similar to standard phone calls from a landline phone.
When and where to use:
When you receive a Telephone Call, you hear a telephone-type ringing and the LED blinks green. The
backlight of the screen turns green.The display shows Phone call and the call received icon blinks.
Procedure:
1 Press the Menu Select button directly below Resp.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
3 Press
or the Menu Select button directly below Exit to hang up and return to the Home
screen.
5.6
Methods to Make a Radio Call
You can select a zone, channel, subscriber ID, or talkgroup by using:
• The preprogrammed Zone menu.
• The Mode Rocker .
• A preprogrammed button.
• The Contacts list (see Contacts on page 46).
5.6.1
Making a Talkgroup Call
Procedure:
1 Perform one of the following actions:
• or to Tgrp and press the Menu Select button directly below Tgrp. The display shows
the last-selected talkgroup. Press the Menu Select button directly below Sel .
6875946M01-JP
Chapter 5: General Radio Operation
35