User's Guide

4 Press or to scroll through the list and press Menu Select button directly below Sel to
connect to the selected network.
Radio displays the WiFi status, the selected network, and the signal strength.
NOTICE: The List and Rfsh buttons are not available when WiFi is searching or connecting to
network.
6.28.3
Checking the Wi-Fi Configuration and Status of the Radio
Procedure:
1 Perform one of the following actions:
• Long press the preprogrammed Wi-Fi button.
• or to WiFi and press the Menu Select button directly below WiFi.
The display shows the current status of the Wi-Fi as described next.
Searching
Looking for available Wi-Fi networks that have been preprogrammed into the radio.
Connecting
In the process of connecting to a found Wi-Fi network.
Connected
Connected to one of the preprogrammed Wi-Fi networks.
No Service
No available networks or connection with one of the networks failed.
If the radio is Wi-Fi connected, you see a Wi-Fi signal strength indicator,
on the display.In
addition, the WiFi menu shows Connected under the connection Status heading, what network
you are connected to under the Network heading, and the signal strength to that network under
the Sig Strength heading.
2 Press to exit.
6.29
Utilities
This chapter explains the operations of the utility functions available in your radio.
6.29.1
Selecting the Power Level
Prerequisites:
NOTICE: This feature must be preprogrammed by a qualified radio technician.
When and where to use:This feature enables you to reduce the transmit power level for specific case
that requires a lower power level. You can select the power level at which your radio transmits. The
radio always turns on to the default setting.
Power level Low enables a shorter transmitting distance and to conserve power. Power level High
enables a longer transmitting distance.
6875946M01-JP
Chapter 6: Advanced Features
103