User's Guide

You can change the command between the two control heads by pressing the Menu Select button
directly below F/R, or the Menu Select button on the keypad microphone.
6.4
Remote Monitor
This feature allows the system administrator to turn on the microphone of a targeted radio with a
subscriber alias or ID.
When remote monitor feature is activated, the audio transmission can be configured in CPS to route
the audio to the radio internal microphone, wired RSM microphone, or Bluetooth wireless microphone.
In life-threatening or critical situations, the system administrator can remotely monitor any audible
activity surrounding the targeted radio.
6.5
Contacts
This feature provides “address-book” capabilities on your radio. Each entry corresponds to an alias
(name) and ID (number) that you use to initiate a call. Contact entries are alphabetically sorted
according to the entry alias.
Also, each entry, depending on context (conventional, trunking, or phone), associates with one or up to
five IDs according to the following types of calls:
• Phone Call
• Private Call
• Selective Call
• Call Alert
Each entry within Contacts contains the following information:
• Call Alias (Name)
• Call ID (Number)
• Call Type (Icon)
• WACN ID (ASTRO 25 Trunking IDs only)
• System ID
NOTICE: Your radio must be preprogrammed to allow you to add, edit, or delete the contact
entries.
Your radio also supports a maximum of 50 call lists. Each list can store up to 100 IDs.
NOTICE: Your radio is preprogrammed with a few contacts per Call Lists. Check with your
dealer or system administrator for more information.
6.5.1
Making a Private Call from Contacts
Prerequisites:Your radio must be preprogrammed to allow you to use this feature.
Procedure:
1
or to Cnts and press the Menu Select button directly below Cnts.
The entries are alphabetically sorted.
2 or to the required subscriber alias.
68012006034-EP
Chapter 6: Advanced Features
49