User's Guide

NOTICE: Valid characters for a username entry are capital letters (A–Z), small letters (a–z),
numbers (0–9), symbols (*, #, -, /), and the space character.
The maximum length for a username is eight characters. Usernames are not case-sensitive in
server mode but are case-sensitive in non-server mode.
A predefined username may sometimes be invalid because the programming software that is
used to set predefined usernames allows you to set usernames comprising of eight characters
or more.
6.10.2.1
Logging In as a User
Procedure:
1
or to User and press the Menu Select button directly below User.
The display shows the User Login screen.
2 Perform one of the following actions:
• or to [ID Entry] and press the Menu Select button directly below Edit to enter ID.
A blinking cursor appears on the screen. Use the keypad to type or edit a user name. Press
the Menu Select button directly below Ok to submit.
•
or to scroll through the list of predefined user names. Press the Menu Select button
directly below Sel to select the predefined user name.
• Press and hold or to scroll through the list of predefined user names at a fast scroll
rate. Press the Menu Select button directly below Logn to select the predefined user name.
If the selected predefined username has more than eight (8) characters, or an invalid character
in it, the display momentary shows Invalid ID.
3 Press the Menu Select button directly below PIN.
A blinking cursor appears beside PIN.
4 Enter your Personal Identification Number (PIN) number.
The maximum PIN length is four digits. The PIN number appears as asterisks.
5 Press the Menu Select button directly below Logn.
One of the following scenarios occurs:
• In ARS Server Mode, the display shows the User Login Indicator icon, the ID, and In
progress, with Cncl .
• In ARS Non-Server Mode, the display shows the User Login Indicator icon, the ID, and
Logged in, with Logt and Exit.
• In non-ARS enabled mode, the display shows Offline, with Logt and Exit.
One of the following scenarios occurs:
• If the user name is invalid, login fails and the user login failure indicator (IP indicator) icon blinks.
The display also shows Login failed.
• If the PIN is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The
display also shows Login failed.
• Wait for the logged in confirmation screen. If the login process is successful, the display shows the
successful user login indicator (IP indicator) icon and Logged in, with Logt and Exit.
68012006034-EM
Chapter 6: Advanced Features
65