Instruction Manual

When upgrading from a mobile radio, the existing headset cable HLN6890 requires these two pins to
be swapped. The other motorcycle headset cable with this pin change is 3080010R07.
Figure 114: Motorcycle Wiring Harness Rework
1
7
8
14
13
20
21
26
J2, BACK OF RADIO
Insert into Pin 22
(Monitor)
Remove from Pin 1
(VIP OUT 1)
(Female-Pins)
1
3
5
6
4
2
SPK -
VIP OUT 1
AUX_MIC
SPK +
GND
AUX_PTT
5.15
Installing the O5 and E5 Control Head Sunshield
Follow the procedure to install the sunshield (part number NNTN7279_) to the O5 and E5 control head.
Procedure:
1 Assemble the sunshield to the remote mount trunnion. The same process can be used for the
motorcycle trunnion.
Figure 115: Remote Mount Trunnion with Sunshield
2 Position the sunshield and remove the Velcro adhesive backing.
MN005720A01-AB
Chapter 5: Motorcycle Radio Installation
121