Installation Manual

Introduction
The vehicle WIFI window mount antenna is intended for mounting on the windshield of the
vehicle. After completing the installation, the cable is concealed between the headlining and
the roof of the vehicle, with minimum disturbance to the headlining and the upholstery.
Figure 1-1 shows the WIFI window mount antenna.
Figure 1-1. WIFI Window Mount Antenna
FCC Requirements
Consider the following factors when installing an antenna.
• Install the vehicle antenna internal to the vehicle on the windshield, and in accordance
with the requirements contained in this manual.
• Ensure the antenna cable is easily routed to the radio.
• Ensure that the antenna cable is routed separately and not in parallel to any other
vehicle wiring or mobile radio cable wiring.
To comply with FCC regulations when installing the antenna lead-in
cable, do not shorten the cable.
PMAN5100
PMAN5101
!
C a u t i o n
PMLN7726_.book Page 2 Monday, August 27, 2018 4:35 PM