Installation Instructions

NOTICE: For optimum radio performance, orient the mounting trunnion as shown in the
following figures. For new or existing installations of APX 2500, APX 4500, and APX 1500, use
only the APX mobile trunnion, kit number HLN6861_.
Figure 44: Enhanced Single Band Mobile Radio Trunnion Orientation
1
Applies to radios in dash and remote installations.
No. Description
1 Radio Front
2.2.1
Dash Mount with Trunnion
Procedure:
1 Referring to the following table, select the suitable trunnion kit per the type of mid power radio.
2 Mount your radio on the transmission hump or under the dash.
NOTICE:
When mounting the trunnion on the transmission hump, ensure that the transmission
housing is not affected. Plan your installation, ensuring enough room for the accessory
connector and cable at the back of the radio.
This configuration shows the O5 control head. The TIB is used for O3 control head for
the same configuration.
MN005720A01-AB
Chapter 2: Standard Configurations
50