Installation Instructions

Item No. Part Number Description
1 01-80743T91 Mic Hang-Up Clip Assembly
2 03-07644M19 Screw, Machine,
8-32 x 7/16
3 - Vehicle Mounting Surface
2.2.3
Radio Locking
The section describes the radio locking on the trunnion.
2.2.3.1
Locking Kit
Enhanced Single Band Mobile Radio
If an optional locking kit (HLN6372_) is used, position the lock housing on the trunnion after installing
the radio mounting screws. Then rotate the lock with the key in it and remove the key to lock the radio.
You can install the lock on either side of the radio, and in dash and remote mount installations.
Figure 57: Locking Kit (Optional)
1
2
3
No. Description
1 Wing Screw
2 Lock Housing
3 Lock
MN005720A01-AB
Chapter 2: Standard Configurations
60