Installation Instructions

8F083X03 Rev 17

DVRS-Product Safety and RF Exposure Booklet 30

8 inches (20cm)

(APX8500MP/APX8500HP)

17.7 inches (45cm)

(XTL and Non APX8500)

8 inches (20cm)

(APX8500MP/APX8500HP)

8 inches (20cm)

Table B – Antenna Locations for XTL/APX with DVR

Mobile Products

Antenna Location

Mobile

DVR

XTL5000/XTL2500

LOC 2

LOC 5

APX6500/APX7500

(“AN” Model Only)

LOC 1, LOC 3

(Both Single and Dual Bands)

LOC 5

APX8500 MP/APX8500HP

Loc 2

(7/800 and All Band)

LOC 1, LOC 3

(VHF and UHF)

LOC 5

APX2500/APX4500

(“AN” Model Only)

LOC 2

LOC 5

APX6500/APX6500Li

APX5500/APX4500/APX2500/APX1500

(“BN” Model Only)

LOC 2

LOC 5

QMA Connection (APX8500 MP/APX8500 HP Only)

APX8500 is using a quick disconnect connection called QMA. This does not require any

tightening.

• Ensure there is sufficient slack in the antenna cable.

• Ensure that the collar of the antenna cable plug does not bind.

• Engage the QMA cable plug onto the jack, listening for a click to ensure proper

engagement.

• Gently tug on the cable to ensure that it is engaged.

• To disengage, pull back on the cable plug’s collar and pull the cable straight off the jack.