Assembly Instructions

Procedure:
1 Use the URC trunnion as a template to mark the mounting holes. Then, drill 5/32 in. holes. If
mounting on a plastic surface, use a metal backing plate.
2 Attach the trunnion bracket using all four 10 – 16 in. x 5/8 in. self-tapping screws provided.
3 Temporarily install the URC (adjust for proper viewing angle) and fasten it to the trunnion with
two wing screws. Test the installation to ensure that the unit is securely locked in place.
Figure 81: Universal Relay Controller Installation Exploded View
1
2
3
4
5
6
No. Description
1 Use four mounting screws on all installations
2 Mounting surface
3 Metal backing plate (not supplied)
IMPORTANT: Use this plate if mounting trunnion on plastic or
unstable surface.
4 Drill four 5/32” holes in mounting surface
5 Trunnion
MN005720A01-AB
Chapter 3: Universal Relay Controller Installation
79