Wiring Diagram

MN003109A01_aa
Motorcycle Radio Installation - Mid Power Installing the Speaker and Control Head 5-7
5.4 Installing the Speaker and Control Head
NOTE: To disable the internal speaker of the O2 Control Head, please refer to Section 2.5.1: “Internal
Speaker Disassembly” .
The control head mounting location and configuration is determined largely by the make and model
of motorcycle. Two different mounting configurations are described below. One involves mounting
the speaker and control head together as a unit using the combination speaker/control-head bracket
(shown in Figure 5-4) supplied by Motorola Solutions. Alternately, the control head may be mounted
by itself using a smaller control-head bracket supplied by Motorola Solutions. In this case, the
speaker is mounted elsewhere. This section outlines installation procedures for each configuration
mentioned above. The customer (or installer) is in the best position to determine the most
appropriate mounting configuration for the control head and speaker based on the particular
motorcycle on which the equipment is to be mounted.
Figure 5-3. Motorcycle Control Head Cabling (3075217A01)
When determining its location, position the control head so that it is clearly visible and
within easy reach of the motorcycle operator.
!
C a u t i o n
Draft