Wiring Diagram

MN003109A01_aa
Options and Accessories Installation Motorola Solutions Branded SB9600 Siren Connection to APX 8500 4-13
Figure 4-12. Pinout for cable KT000247A01
Figure 4-13. Interfacing the Y-cable to the Motorola Solutions Branded SB9600 Siren and External Accesso-
ries
The Y-cable KT000247A01 is primarily designed to allow for simultaneous operation of the Motorola
Solutions Branded SB9600 siren and still retain duplicate access to all the MAP (J2) connector pins
located on the APX 8500 remote TIB. Use of emergency accessories, speakers, programming
cables, VIPS, and others are possible through the P3 connector of Y-cable KT000247A01. The 25pin
connector P2 does not contain every signal from the legacy DB25 port, called J600 on the APX
7500. Therefore, some legacy functionality that is A+ is reduced with the APX 8500 remote mount
configuration compared to the APX 7500 remote mount configuration.
NOTE: Only USB 1.5 meter data cable HKN6163_ is approved for use in series with the Y-cable
KT000247A01 at connector P3. USB 4 meter data cable HKN6172_ is not approved for use
in series with the Y-cable at connector P3.
Siren Cable
Draft