User's Manual
Table Of Contents
- Copyrights
- Contact Us
- Document History
- FCC Information
- About LXN 500
- Overview
- Operation and Configuration
- Getting Started
- Powering On
- Powering Off
- What is Required for Configuration
- Connecting the LXN 500 to a Laptop
- Signing In
- Viewing System Notifications
- Signing Out
- Account Management
- Adding a Single Subscriber (UEs)
- Deactivating/Activating Subscriber
- Importing Subscribers From .csv File
- Deleting Subscriber
- Deleting All Subscribers
- UE Activity
- Statistics
- Setting the eNodeB
- Setting the System
- About LXN 500
- Configuring the DragonForce Server
- Configuring the WAVE 5000 Server
- Provisioning the Mobile Device (UE)
- Vehicle Installation
- Troubleshooting and Maintenance
- Technical Specifications
MN003563A01-B
Vehicle Installation
48
Send Feedback
Configuration Options of Antenna Installation
The LXN 500 can be installed inside a vehicle trunk using one of the two antenna configuration options.
Dome Antenna Configuration
Fixed-mounted 4 ports antenna for use in public safety vehicular applications. The antenna requires a
hole in the car roof.
The antenna consists of 4 separate dedicated antennas for LTE Main (LTE1) LTE Div. (LTE2), WiFi and
GPS.
The antenna is provided with four short, flexible coaxial cables (threads) coming out of the antenna
bottom side. The 12-ft coaxial cables are provided to connect between these threads and the LXN 500
connectors. The cables are connected to the LTE1, LTE2, WIFI and GPS ports of the LXN 500.
Figure 3-1
Dome Antenna
Battery
LXN500
on trunk floor
PWR
LTE1
LTE2
GPS
WIFI
GPS
Wi Fi
LTE1
LTE2