User's Manual
Table Of Contents
- Copyrights
- Contact Us
- Document History
- FCC Information
- About LXN 500
- Overview
- Operation and Configuration
- Getting Started
- Powering On
- Powering Off
- What is Required for Configuration
- Connecting the LXN 500 to a Laptop
- Signing In
- Viewing System Notifications
- Signing Out
- Account Management
- Adding a Single Subscriber (UEs)
- Deactivating/Activating Subscriber
- Importing Subscribers From .csv File
- Deleting Subscriber
- Deleting All Subscribers
- UE Activity
- Statistics
- Setting the eNodeB
- Setting the System
- About LXN 500
- Configuring the DragonForce Server
- Configuring the WAVE 5000 Server
- Provisioning the Mobile Device (UE)
- Vehicle Installation
- Troubleshooting and Maintenance
- Technical Specifications
47
MN003563A01-B
Vehicle Installation
Send Feedback
Vehicle Installation
This section describes the tools and equipment, planning requirements and product inspections
necessary for a smooth installation of the LXN 500 system.
Proper planning will help to ensure that the installation is completed without difficulty and that no
damage occurs to the units or the vehicle.
Unpacking
Unpack your shipment and check the contents to ensure that you have received all the specified items.
Thoroughly inspect the equipment for shipping damage as soon as possible after delivery. Report any
damage you find to your Motorola Solutions Customer Service representative immediately.
Save the packing box and plastic bags for storage and shipping. Both the shipping box and the bags
protect the LXN 500 components from physical and electrostatic damage.
The following optional parts can be used to mount the LXN 500:
•
LXN 500
•
Four mounting brackets with 12 screws
•
13.1 feet (4 meter) power cable with 20A fuse
•
One dome antenna or two diversity antennas
•
Power protection and back-up unit (Optional)
•
Quick start guide and related documentation.
NOTE The LXN 500 is a reliable product when installed correctly. However, performance can be seriously
CAUTION LXN500 must only be deployed in a ‘restricted access location’.
impaired if it is
not installed correctly. Thoughtful planning can make the difference. Product to be
installed by a service person. Before the installation, please see rating label which is located on base of
the unit
.