User's Manual
Table Of Contents
- Copyrights
- Contact Us
- Document History
- FCC Information
- About LXN 500
- Overview
- Operation and Configuration
- Getting Started
- Powering On
- Powering Off
- What is Required for Configuration
- Connecting the LXN 500 to a Laptop
- Signing In
- Viewing System Notifications
- Signing Out
- Account Management
- Adding a Single Subscriber (UEs)
- Deactivating/Activating Subscriber
- Importing Subscribers From .csv File
- Deleting Subscriber
- Deleting All Subscribers
- UE Activity
- Statistics
- Setting the eNodeB
- Setting the System
- About LXN 500
- Configuring the DragonForce Server
- Configuring the WAVE 5000 Server
- Provisioning the Mobile Device (UE)
- Vehicle Installation
- Troubleshooting and Maintenance
- Technical Specifications
MN003563A01-B
Operation and Configuration
38
Send Feedback
Battery Diagnostics
The Battery Diagnostics section enables to view the current status of each of the batteries installed
inside the LXN 500 backpack (Future option of the LXN 500).
Perform this procedure to view the current status of the LXN 500 backpack batteries.
Procedure:
1. Sign in to the LXN 500 O&M Configuration site (See Signing In on page 20).
2. Click the System tab.
3. From the Diagnostics menu, select Battery.
4. Click ’Battery 1’ or ’Battery 2’ to switch and view each battery status.
Result: The following battery indications may display:
•
OFF - No battery or depleted battery
•
GREEN - Battery is active and its capacity is more than 50%
•
ORANGE - Battery capacity is 10% to 50%
•
RED - Battery capacity is less than 10%
Figure 2-16
Battery Diagnostics
Ports Test
Perform this procedure to test the LXN 500 communication ports.
1. Sign in to the LXN 500 O&M Configuration site (See Signing In on page 20).
2. Click the System tab.