User's Manual
Table Of Contents
- Copyrights
- Contact Us
- Document History
- FCC Information
- About LXN 500
- Overview
- Operation and Configuration
- Getting Started
- Powering On
- Powering Off
- What is Required for Configuration
- Connecting the LXN 500 to a Laptop
- Signing In
- Viewing System Notifications
- Signing Out
- Account Management
- Adding a Single Subscriber (UEs)
- Deactivating/Activating Subscriber
- Importing Subscribers From .csv File
- Deleting Subscriber
- Deleting All Subscribers
- UE Activity
- Statistics
- Setting the eNodeB
- Setting the System
- About LXN 500
- Configuring the DragonForce Server
- Configuring the WAVE 5000 Server
- Provisioning the Mobile Device (UE)
- Vehicle Installation
- Troubleshooting and Maintenance
- Technical Specifications
33
MN003563A01-B
Operation and Configuration
Send Feedback
4. Click Backup to backup parameters you configured using the Q&M (excluding IMSIs) or Restore to
use the
last saved settings of your servers and applications.
Figure 2-13
Backing-up and Restoring Servers and Applications
Performing Diagnostics
Follow procedures below to perform diagnostics to the LXN 500 unit.
Communication Diagnostics
The communication diagnostics is used for testing the 4G (LTE) communication with the LXN 500.
The test is performed between the LXN 500 and any available LTE mobile device connected to the LXN
500.
To perform communication diagnostics, the LXN 500 is using the Iperf application.
Iperf application is a cross-platform tool used for network performance measurement.
Iperf application must also be installed on the mobile device used for the test. The iperf application is
securely distributed through the Google Play store.