User's Manual
Table Of Contents
- Copyrights
- Contact Us
- Document History
- FCC Information
- About LXN 500
- Overview
- Operation and Configuration
- Getting Started
- Powering On
- Powering Off
- What is Required for Configuration
- Connecting the LXN 500 to a Laptop
- Signing In
- Viewing System Notifications
- Signing Out
- Account Management
- Adding a Single Subscriber (UEs)
- Deactivating/Activating Subscriber
- Importing Subscribers From .csv File
- Deleting Subscriber
- Deleting All Subscribers
- UE Activity
- Statistics
- Setting the eNodeB
- Setting the System
- About LXN 500
- Configuring the DragonForce Server
- Configuring the WAVE 5000 Server
- Provisioning the Mobile Device (UE)
- Vehicle Installation
- Troubleshooting and Maintenance
- Technical Specifications
MN003563A01-B
Operation and Configuration
30
Send Feedback
Setting the eNodeB
The eNodeB is the part of the LXN 500 that sends and receives radio transmissions and signaling from
and to the mobile devices. The eNodeB process the LTE analogue and digital over-the-air interface
signals.
Perform this procedure to configure the eNodeB.
Procedure:
1. Sign in to the LXN 500 O&M Configuration site (See Signing In on page 20).
2. Click the eNodeB tab.
Result: The eNodeB screen is displayed.
Figure 2-11
eNodeB Screen
3. In the Bandwidth field, select the required bandwidth.
Table 2-3
eNodeB Band Configuration
Band Bandwidth (MHz) Uplink / Downlink Frequency Range
14
5, 10 UL:788 - 798, DL: 758 - 768
20
5, 10, 20 UL: 832 - 862, DL: 791 - 821
28
5, 10, 20 UL: 723 - 748, DL: 778 - 803