User's Manual
Table Of Contents
- Copyrights
- Contact Us
- Document History
- FCC Information
- About LXN 500
- Overview
- Operation and Configuration
- Getting Started
- Powering On
- Powering Off
- What is Required for Configuration
- Connecting the LXN 500 to a Laptop
- Signing In
- Viewing System Notifications
- Signing Out
- Account Management
- Adding a Single Subscriber (UEs)
- Deactivating/Activating Subscriber
- Importing Subscribers From .csv File
- Deleting Subscriber
- Deleting All Subscribers
- UE Activity
- Statistics
- Setting the eNodeB
- Setting the System
- About LXN 500
- Configuring the DragonForce Server
- Configuring the WAVE 5000 Server
- Provisioning the Mobile Device (UE)
- Vehicle Installation
- Troubleshooting and Maintenance
- Technical Specifications
MN003563A01-B
Operation and Configuration
24
Send Feedback
Adding a Single Subscriber (UEs)
Perform this procedure to add a new subscriber (User Equipment-UEs) to the LXN 500.
Procedure:
1. Sign in to the LXN 500 O&M Configuration site (See Signing In on page 20).
2. In the LXN 500 O&M Configuration screen, on the EPC tab, click the Add USIM... button.
Result: The add USIM fields are displayed.
Figure 2-5
Add USIM Fields
3. Enter the information of the USIM.
•
In the NAME field, enter the logical name of the USIM
•
In the IMSI field, enter the unique identifier of the USIM
•
In the K field, enter transport key
•
In the OP field, enter the operator code
•
In the MSISDN field, enter the Mobile Station International Subscriber Directory Number (up to 15
digits)
•
In the Profile Name field, set to Default.
NOTE The USIM information is usually provided by your USIM cards provider with the USIM
cards package.