User's Manual
Table Of Contents
- Copyrights
- Contact Us
- Document History
- FCC Information
- About LXN 500
- Overview
- Operation and Configuration
- Getting Started
- Powering On
- Powering Off
- What is Required for Configuration
- Connecting the LXN 500 to a Laptop
- Signing In
- Viewing System Notifications
- Signing Out
- Account Management
- Adding a Single Subscriber (UEs)
- Deactivating/Activating Subscriber
- Importing Subscribers From .csv File
- Deleting Subscriber
- Deleting All Subscribers
- UE Activity
- Statistics
- Setting the eNodeB
- Setting the System
- About LXN 500
- Configuring the DragonForce Server
- Configuring the WAVE 5000 Server
- Provisioning the Mobile Device (UE)
- Vehicle Installation
- Troubleshooting and Maintenance
- Technical Specifications
MN003563A01-B
Operation and Configuration
20
Send Feedback
6. On the laptop, launch Google Chrome and log-on to: https://10.1.<UID>.8
Result: The LXN 500 O&M Configuration - Sign In screen is displayed (See Figure 2-3).
Signing In
Perform this procedure to sign-in to the LXN 500 O&M Management site.
Procedure:
1. Connect the LXN 500 to a laptop (See Connecting the LXN 500 to a Laptop on page 19).
In
the LXN 500 O&M Configuration - Sign In Screen, enter User and the corresponding Password and
click Sign In.
Figure 2-3
LXN 500 O&M Configuration - Sign In Screen
Result: The EPC tab of the LXN 500 O&M Configuration screen is displayed showing admin on the
upper right side of the screen.
NOTE On first connection, you may be required to follow a self signed certificate warning that
appears on the browser screen. When a warning appears on the screen, click
ADVANCED and then click Proceed to and the ip address shown.
IMPORTANT When signing in for the first time, sign in with the default Administrator password - enter:
User: admin
Password: M0t0r0laAdm1n1!
Change the default password upon signing in for the first time.
M0t0r0laAdm1n1!
admin