User's Manual
Table Of Contents
- Copyrights
- Contact Us
- Document History
- FCC Information
- About LXN 500
- Overview
- Operation and Configuration
- Getting Started
- Powering On
- Powering Off
- What is Required for Configuration
- Connecting the LXN 500 to a Laptop
- Signing In
- Viewing System Notifications
- Signing Out
- Account Management
- Adding a Single Subscriber (UEs)
- Deactivating/Activating Subscriber
- Importing Subscribers From .csv File
- Deleting Subscriber
- Deleting All Subscribers
- UE Activity
- Statistics
- Setting the eNodeB
- Setting the System
- About LXN 500
- Configuring the DragonForce Server
- Configuring the WAVE 5000 Server
- Provisioning the Mobile Device (UE)
- Vehicle Installation
- Troubleshooting and Maintenance
- Technical Specifications
13
MN003563A01-B
Overview
Send Feedback
2
BAT2
Status LED of backpack battery 2 (Future option of the LXN 500).
NOTE To switch between active and standby battery, press the Power button for one second
and release.
•
LED OFF - No battery or battery is disconnected
•
GREEN - Battery is active and its capacity is more than 50%
•
BLINKING GREEN - Battery is in Standby mode and its capacity is more than 50%
•
ORANGE - Battery is active and its capacity is 10% to 50%
•
BLINK ORANGE - Battery is in Standby mode and its capacity is 10% to 50%
•
RED - Battery s active and its capacity is less than 10%
•
BLINKING RED - Battery is in Standby mode and its capacity is less than 10%
3
BAT1
Status LED of backpack battery 1(Future option of the LXN 500).
NOTE To switch between active and standby battery, press the Power button for one second
and release.
•
LED OFF - No battery or battery is disconnected
•
GREEN - Battery is active and its capacity is more than 50%
•
BLINKING GREEN - Battery is in Standby and its capacity is more than 50%
•
ORANGE - Battery is active and its capacity is 10% to 50%
•
BLINK ORANGE - Battery is in Standby mode and its capacity is 10% to 50%
•
RED - Battery is active and its capacity is less than 10%
•
BLINKING RED - Battery is in Standby mode and its capacity is less than 10%
4
APP
APP is a status LED used to diagnose and troubleshoot the LXN 500. Refer to
Troubleshooting and Maintenance whenever the LED shows orange or red color.
The APP (Application Server) stores the applications used by the LXN 500. The optional
applications provided with the LXN 500 are the WAVE 5000 that enables full interoperability
between LTE and land mobile radio systems and the DragonForce software.
•
LED OFF - OFF
•
GREEN - All applications are running
•
BLINKING GREEN - Applications startup in progress
•
ORANGE - Not all applications are running. At least one application is down and one is
runnin
g
•
BLINKING ORANGE - Applications shutdown in progress
•
RED - Failure: All applications are down
•
BLINKING RED - Fatal Error: Cannot connect to application server
Table 1-2
Features of LXN 500 Front Panel (Continued)
Item Description