User Manual

•
Press the Menu Select button directly below
EXIT to return to the Home screen.
4 Press the Menu Select button directly below LIST
to see the quick text list.
5
or to scroll through the list of messages and
press the Menu Select button directly below SEL
to select the required message.
The message appears on the COMPOSE screen,
with a blinking cursor at the end of it. Use the
keypad to edit the message, if required.
6 Press the Menu Select button directly below
OPTN.
7 Press the Menu Select button directly below
SEND.
8
Perform one of the following actions:
•
or to scroll through the address list and
select the required address.
•
or to [OTHER RECPNT] and press the Menu
Select button below EDIT. When a blinking
cursor appears on the ENTER ADDRESS screen.
Use the keypad to type the address entry.
9 Press the Menu Select button directly below SEND
or press the PTT button to send the message.
The display shows the SEND MESSAGE screen and
SENDING MSG.
If the message is sent, you hear a tone and the
display shows MSG SENT.
If the message is not sent, you hear a low tone,
the display shows SEND FAILED and returns to the
main TMS screen.
Note:
You can append a priority status and/or a
request reply to your message. See Priority
Status and Request Reply of a New Text
Message on page 88 for more
information.
Priority Status and Request Reply of a New Text
Message
Before sending your message, you can append a
priority status and/or a request reply to your message.
Advanced Features
88
English
Draft