User Manual

The SSA Alert for all sites stop.
Stopping SSA Notification of All Available Sites
1
or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3
or to STOP ALERT and press the Menu Select
button directly below SEL.
The display shows the Select Site screen.
4
or to [All AVAIL] and press the Menu Select
button directly below SEND.
The display shows SENDING REQ.
If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
REQ FAILED.
If the request is successful, the display shows REQ
SUCCESSFUL.
5 To return to the Home screen, press the Menu
Select button directly below EXIT.
The SSA Alert for all available sites stop.
Channel Change on Off Hook on All Channels
This feature enables the mode of the radio to be
changed based on the HUB on/off-hook state on all
control heads.
Whenever the radio goes off-hook, the radio changes
to a preprogrammed zone channel specifically for off-
hook state. When the user returns the radio to on-
hook state, it reverts to its previous channel zone
before the radio goes off-hook.
When the radio is in off-hook state, manual mode
change (including mode change triggered by third
party devices) is allowed. Radio reverts back to the
last mode before off-hook once the radio goes on-
hook.
Note:
During PL Defeats and Suspend Scan during
on-hook state, the radio is converted to work
in new channel and Channel Change on Off
Hook feature is suspended until these
conditions end.
We do not recommend that “Hub Suspend
Scan" and "Channel Change on Off Hook" to
be enabled simultaneously.
Advanced Features
125
English
Draft