User Manual

A blinking cursor appears in the EDIT NAME
screen.
5 Use the keypad to edit the alias.
6
Perform one of the following actions:
•
Press the Menu Select button directly below
OK once you are done.
•
Press the Menu Select button directly below
CNCL to return to the Waypoints main screen.
7
The display shows <WAYPOINT NAME> UPDATED
and the radio returns to the Waypoints main
screen.
8
Perform one of the following actions:
•
Press the Menu Select button directly below
BACK to return to the previous screen.
•
Press or the PTT button to return to the
Home screen.
Editing the Coordinates of a Waypoint
Note:
Only the preprogrammed coordinates of Home
and Destination can be edited by the user.
Ensure your radio shows the current location on the
screen.
1 Press the Menu Select button directly below
OPTN.
2
or to WAYPOINTS and press the Menu Select
button directly below SEL.
The display shows a list of waypoints.
3
Perform one of the following actions:
•
or to [HOME] and press the Menu Select
button directly below OPTN.
•
or to [DESTINATION] and press the Menu
Select button directly below OPTN.
4
or to EDIT LOCATION and press the Menu
Select button directly below SEL.
The first number blinks.
5
Utilize the following control buttons to select the
number/coordinates if required, then press the
Menu Select button directly below EDIT to change
the number/coordinates.
Advanced Features
106
English
Draft