Installation Manual

MN003109A01_aa

3-2 Universal Relay Controller Installation Universal Relay Controller Mounting

Install the URC as follows:

1. Use the URC trunnion as a template to mark the mounting holes;

drill 5/32" holes. If mounting on a plastic surface, use a metal backing plate.

2. Attach the trunnion bracket using all four 10 – 16" x 5/8" self-tapping screws provided.

3. Temporarily install the URC (adjust for proper viewing angle) and fasten it to the trunnion with

two wing screws. Test the installation to ensure that the unit is securely locked in place.

Figure 3-2. Universal Relay Controller Installation Exploded View

Adjust the universal relay controller

to desired angle and secure with

wing screws

Use four mounting screws on all

installations

TRUNNION

Drill four 5/32” holes in

mounting surface

Mounting surface

IMPORTANT:

Use a metal backing plate (not

supplied) if mounting trunnion on

plastic or unstable surface

Draft

Dra

raft

Dra

Draf

Dra

Draf

Dra

aft