User's Guide

• The display shows the subscriber alias or ID, the
RSSI icon, Phone Call
, and the Phone Call
icon.
If unsuccessful:
• A tone sounds.
• The display shows Phone Call Failed.
• Your radio returns to the Access Code input
screen. If the access code was preconfigured in
the Contacts list, the radio returns to the screen
you were on prior to initiating the call.
6 Press the PTT button to talk and release it to listen.
The RSSI icon disappears during transmission.
7 To enter extra digits, if requested by the Phone Call,
do one of the following.
• Press any keypad key to begin the input of the
extra digits. The display shows Extra Digits:
and a blinking cursor. Enter the extra digits and
press the button to proceed. The DTMF
tone sound
• Press One Touch Access
button. The DTMF
tone sounds. If the entry for the One Touch
Access
button is empty, a negative indicator tone
sounds and the radio returns to the previous
screen.
8
Press to end the call.
If deaccess code was not preconfigured in the
Contacts list, the display shows De-Access Code:
and a blinking cursor. Enter the deaccess code and
press to proceed.
The radio returns to the previous screen. The DTMF
tone sounds and the display shows Ending Phone
Call.
If successful:
• A tone sounds.
•
The display shows Phone Call Ended.
• Your radio returns to the Phone Call screen.
If unsuccessful:
• Your radio returns to the Phone Call screen.
English
88 Send Feedback