User's Guide

Making Phone Calls
Follow the procedure to make Phone Calls on your radio.
1 Press the programmed One Touch Access button
to the predefined alias or ID.
If the entry for the One Touch Access button is
empty, a negative indicator tone sounds.
If the access code is not preconfigured in the
Contact List, the display shows Access Code:.
2
Enter the access code, and press to proceed.
The access or deaccess code cannot be more than
10 characters.
3 Press the PTT button to respond to the call.
4 Release the PTT button to listen.
5 Enter extra digits with the keypad if requested by the
call, and press to proceed.
If the call ends while you are entering the extra digits
requested by the call, your radio returns to the
screen you were on before initiating the call.
The DTMF Tone sounds. Your radio returns to the
previous screen.
6
Press to end the call.
7 Do one of the following:
• If the deaccess code was not preconfigured,
enter the deaccess code when the display shows
De-Access Code:, and press to proceed.
The radio returns to the previous screen.
• Press the programmed
One Touch Access
button. If the entry for the One Touch Access
button is empty, a negative indicator tone sounds.
The DTMF Tone sounds and the display shows
Ending Phone Call.
If the call ends successfully:
• A tone sounds.
• The display shows Call Ended.
English
82 Send Feedback