User's Guide

requested by the Phone Call, your radio returns to
the screen you were on prior to initiating the call.
NOTICE:
The call initiator can press to end the All Call.
Receiving All Calls
When you receive an All Call, the following occur:
• A tone sounds.
•
The green LED blinks.
• The display shows the Group Call icon at the top right
corner.
• The first text line shows the caller alias ID.
• The second text line displays either All Call, Site
All Call, or Multi Site Call depending on the type
of configuration.
• Your radio unmutes and the incoming call sounds
through the speaker.
The radio returns to the screen before receiving the All Call
when the call ends.
If the Channel Free Indication feature is enabled, you hear
a short alert tone when the transmitting radio releases the
PTT button, indicating the channel is free for you to use.
You cannot respond to an All Call.
NOTICE:
The radio stops receiving the All Call if you switch to
a different channel while receiving the call.
You are
not able to continue with any menu navigation or
editing until the call ends during an All Call.
Phone Calls
A Phone Call is a call in between an individual radio or a
group of radios and a telephone.
Depending on how the radio is configured, the following
features may or may not be made available:
• Dual Tone Multi Frequency (DTMF) tone
•
De-access code
• Displaying of caller alias or ID on receiving a phone call
• Ability to reject or accept a phone call
The Phone Call capability can be enabled by assigning and
setting up phone numbers on the system. Check with your
system administrator to determine how your radio has been
programmed.
English
Send Feedback 81