User's Guide

the Contacts list, the first line of the display shows
Access Code:. The second line of the display
shows a blinking cursor. Enter the access code and
press the button to proceed. If successful, the
DTMF tone sounds. You hear the dialing tone of the
telephone user. The first line of the display shows
the subscriber alias or ID, and the RSSI icon. The
second line of the display shows Phone Call and
the Phone Call icon. If unsuccessful, a tone sounds
and the display shows Phone Call Failed. Your
radio returns to the Access Code input screen. If the
access code was preconfigured in the Contacts list,
the radio returns to the screen you were on prior to
initiating the call.
6 Press the PTT button to talk and release it to listen.
The RSSI icon disappears during transmission.
7 To enter extra digits, if requested by the Phone Call,
do one of the following.
• Press any keypad key to begin the input of the
extra digits. The first line of the display shows
Extra Digits:
. The second line of the display
shows a blinking cursor. Enter the extra digits
and press the
button to proceed. The DTMF
tone sounds and the radio returns to the previous
screen.
• Press
One Touch Access button. The DTMF
tone sounds. If the entry for the One Touch
Access button is empty, a negative indicator tone
sounds.
8
Press to end the call. If deaccess code was
not preconfigured in the Contacts list, the first line of
the display shows De-Access Code:. The second
line of the display shows a blinking cursor. Enter the
deaccess code and press to proceed. The
radio returns to the previous screen. The DTMF tone
sounds and the display shows Ending Phone Call.
If successful, a tone sounds and the display shows
Phone Call Ended. Your radio returns to the Phone
Call screen. If unsuccessful, your radio returns to the
Phone Call screen. When you press the PTT button
while in the Phone Contacts screen, as tone sounds
and the display shows Press OK to Place Phone
Call. When the telephone user ends the call, a tone
sounds and the display shows Phone Call Ended.
If the call ends while you are entering the extra digits
English
80 Send Feedback