User's Guide

All Calls
An All Call is a call from an individual radio to every radio
on the site or every radio at a group of sites, depending on
system configuration.
An All Call is used to make important announcements,
requiring full attention from the user. The users on the
system cannot respond to an All Call.
Capacity Max supports Site All Call and Multi-site All Call.
The system administrator may configure one or both of
these in your radio.
NOTICE:
Subscribers can support System-Wide All Calls but
Motorola Solutions infrastructure does not support
System-Wide All Calls.
Making All Calls
Your radio must be programmed for you to make an All
Call. Follow the procedure to make All Calls on your radio.
1 Select a channel with the active All Call group alias
or ID. See Selecting a Call Type on page 59
.
2 Press the PTT button to make the call.
The green LED lights up.The display shows the
Group Call icon and either All Call
, Site All
Call, or Multi Site Call depending on the type
of configuration.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
•
Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
Users on the channel cannot respond to an All Call.
The call initiator can press
to end the All Call.
Making All Calls by Using the
Programmable Number Key
Follow the procedure to make All Calls on your radio by
using the programmable number key.
1 Long press the programmed number key assigned to
the predefined alias or ID when you are on the Home
screen.
English
78 Send Feedback