User's Guide

NOTICE:
Depending on how your radio is configured, either
OACSU or Full Off Air Call Set-Up (FOACSU),
responding to Private Calls may or may not require
user acknowledgment.
For the OACSU configuration, your radio unmutes
and the call connects automatically.
Accepting Private Calls
When you receive Private Calls configured as Full Off Air
Call Set-Up (FOACSU):
• The green LED blinks.
1 To accept a Private Call configured as FOACSU, do
one of the following:
•
Press
or to Accept and press
to answer a Private Call.
• Press the PTT button on any entry.
The green LED lights up.
2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period. A tone sounds. The display
shows Call Ended
.
NOTICE:
Both the call initiator and recipient are able to
terminate an on-going Private Call by
pressing .
Declining Private Calls
When you receive Private Calls configured as Full Off Air
Call Set-Up (FOACSU):
•
The green LED blinks.
To decline a Private Call configured as FOACSU, do
one of the following:
•
Press
or to Reject and press
to decline a Private Call.
• Press to decline a Private Call.
English
Send Feedback 77