User's Guide

• Enter the subscriber ID, and press to
proceed.
• Edit the previously dialed subscriber ID, and
press to proceed.
6 Press the PTT button to make the call.
The green LED lights up. The display shows the
destination alias.
7 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
8 Release the PTT button to listen.
The green LED lights up when the target radio
responds. The display shows the transmitting user
alias or ID.
9 If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the
PTT
button to respond to the call.
The call ends when there is no voice activity for a
predetermined period. A tone sounds. The display
shows Call Ended
.
Both the call initiator and recipient are able to
terminate an on-going Private Call by pressing
.
Receiving Private Calls
When you receive Private Calls configured as Off Air Call
Set-Up (OACSU):
•
The green LED blinks.
•
Your radio unmutes and the incoming call sounds
through the speaker.
English
76 Send Feedback