User's Guide

tone sounds and the radio returns to the previous
screen.
• Press
One Touch Access button. The DTMF
tone sounds. If the entry for the One Touch
Access button is empty, a negative indicator tone
sounds.
8
Press to end the call. If deaccess code was
not preconfigured in the Contacts list, the first line of
the display shows De-Access Code:. The second
line of the display shows a blinking cursor. Enter the
deaccess code and press to proceed. The
radio returns to the previous screen. The DTMF tone
sounds and the display shows Ending Phone Call.
If successful, a tone sounds and the display shows
Phone Call Ended. Your radio returns to the Phone
Call screen. If unsuccessful, your radio returns to the
Phone Call screen. When you press the PTT button
while in the Phone Contacts screen, as tone sounds
and the display shows Press OK to Place Phone
Call. When the telephone user ends the call, a tone
sounds and the display shows Phone Call Ended.
If the call ends while you are entering the extra digits
requested by the Phone Call, your radio returns to
the screen you were on before initiating the call.
9 The call ends when there is no voice activity for a
predetermined period. You will hear a short tone.
The display shows Call Ended
.
Both the call initiator and recipient are able to
terminate an on-going Private Call by pressing
.
NOTICE:
During the channel access, press to dismiss
the call attempt and a tone sounds button or to exit
alias search. Press button or to exit alias
search. During the call, when you press One Touch
Access button with the deaccess code
preconfigured or enter the deaccess code as the
input for extra digits, your radio attempts to end the
call.
Making a Private Call with a One Touch
Call Button
The One Touch Call feature allows you to easily make a
Private Call to a pre-defined Private Call alias or ID. This
English
74 Send Feedback