User's Guide

Table Of Contents

Making Private Calls by Using the Alias

Press to access the menu.

Press or to Contacts. Press to

select.

The display shows the entries in alphabetical order.

Press or to the required subscriber alias

or ID. The first line of the display shows Phone

Number:. The second line of the display shows a

blinking cursor. Use the keypad to enter a telephone

number.

Press to select. If the entry selected is empty,

a negative indicator tone sounds and the display

shows Phone Call Invalid #.

Press or to Call Phone and Press

to select. If the access code was not preconfigured

in the Contacts list, the first line of the display shows

Access Code:. The second line of the display

shows a blinking cursor. Enter the access code and

press the button to proceed. If successful, the

DTMF tone sounds. You hear the dialing tone of the

telephone user. The first line of the display shows

the subscriber alias or ID, and the RSSI icon. The

second line of the display shows Phone Call and

the Phone Call icon. If unsuccessful, a tone sounds

and the display shows Phone Call Failed. Your

radio returns to the Access Code input screen. If the

access code was preconfigured in the Contacts list,

the radio returns to the screen you were on before

initiating the call.

6 Press the PTT button to talk and release it to listen.

The RSSI icon disappears during transmission.

7 To enter extra digits, if requested by the Phone Call,

do one of the following.

• Press any keypad key to begin the input of the

extra digits. The first line of the display shows

Extra Digits:

. The second line of the display

shows a blinking cursor. Enter the extra digits

and press the

button to proceed. The DTMF

English

Send Feedback 73