User's Guide

Site Trunking
A site must be able to communicate with the Trunk
Controller to be considered as System Trunking.
If the site cannot communicate with the Trunk Controller in
the system, a radio enters Site Trunking mode. While in
Site Trunking, the radio provides a periodic audible and
visual indication to the user to inform the user of their
limited functionality.
When a radio is in Site Trunking, the radio displays Site
Trunking and a repetitive tone sounds.
The radios in Site Trunking are still able to make group and
individual voice calls as well as send text messages to
other radios within the same site. Voice consoles, logging
recorders, phone gateways, and data applications cannot
communicate to the radios at the site.
Once in Site Trunking, a radio that is involved in calls
across multiple sites will only be able to communicate with
other radios within the same site. Communication to and
from other sites would be lost.
NOTICE:
If there are multiple sites that cover the current
location of the radio and one of the sites enters Site
Trunking, the radio roams to another site if within
coverage.
Calls
This chapter explains the operations to receive, respond to,
make, and stop calls.
You can select a subscriber alias or ID, or group alias or ID
after you have selected a channel by using one of these
features:
Alias Search
This method is used for Group, Private, and All Calls
only with a keypad microphone.
Contacts List
This method provides direct access to the Contacts list.
Manual Dial (by using Contacts)
This method is used for Private and Phone Calls only
with a keypad microphone.
Programmed Number Keys
This method is used for Group, Private, and All Calls
only with a keypad microphone.
English
Send Feedback 61