User's Guide

The alias search is case-insensitive. If there are two
or more entries with the same name, the display
shows the entry listed first in the list.
The first text line shows the characters you entered.
The following text lines show the shortlisted search
results.
5
Press to select.
The display shows <Zone> Selected momentarily
and returns to the selected zone screen.
Selecting a Call Type
Use the Channel Selector Knob to select a call type. This
can be a Group Call, Broadcast Call, All Call, or Private
Call, depending on how your radio is programmed. If you
change the Channel Selector Knob to a different position
(that has a call type assigned to it),
this causes the radio to
re-register with the Capacity Max System. The radio
registers with the Talkgroup ID that has been programmed
for the new Channel Selector Knob position call type.
Your radio does not operate when selected to an
unprogrammed channel, use the
Channel Selector Knob
to
select a programmed channel instead.
Once the required zone is displayed (if you have
multiple zones in your radio), turn the programmed
Channel Selector Knob to select the call type.
Selecting a Site
A site provides coverage for a specific area. In a multi-site
network, the Capacity Max radio will automatically search
for a new site when the signal level from the current site
drops to an unacceptable level.
The Capacity Max system can support up to 250 sites.
Roam Request
A Roam Request tells the radio to search for a different
site, even if the signal from the current site is acceptable.
If there are no sites available:
• The radio
display shows Searching and continues to
search through the list of sites.
English
Send Feedback 59