User's Guide

• Change the channel by using the Scroll Up/Down
buttons to enable VOX.
• Change the channel by using the Volume/Channel
Knob
to enable VOX.
• Turn VOX on or off by using the programmed VOX
button or menu to enable or disable VOX.
• Press the PTT button during radio operation to disable
VOX.
NOTICE:
Turning this feature on or off is limited to radios with
this function enabled. Check with your dealer or
system administrator for more information.
Turning Voice Operating Transmission
On or Off
Follow the procedure to turn VOX on or off on your radio.
1 Do one of the following:
• Press the programmed VOX
button. Skip the
steps below.
• Press
to access the menu.
2
Press or to Utilities. Press to
select.
3
Press or to Radio Settings. Press
to select.
4
Press or to VOX. Press to select.
5
Press
to enable or disable VOX.
NOTICE:
If the Talk Permit Tone is enabled, use a trigger
word to initiate the call. Wait for the Talk Permit
Tone to finish before speaking clearly into the
microphone. See Turning Talk Permit Tone On or
Off on page
192 for more information.
Turning Voice Announcement On or
Off
This feature enables the radio to audibly indicate the
current zone or channel the user has just assigned, or the
programmable button the user has just pressed.
English
470 Send Feedback