User's Guide

WPA/WPA2-Enterprise Wi-Fi network
Uses certificate-based authentication.
Your radio must be pre-configured with a certificate.
NOTICE:
Check with your dealer or system administrator
to connect to WPA/WPA2-Enterprise Wi-Fi
network.
Turning Wi-Fi On or Off
The programmed Wi-Fi On or Off button is assigned by
default. Check with your dealer or system administrator to
determine how your radio has been programmed.
Voice Announcements for the programmed Wi-Fi On or
Off button can be customized through CPS according to
user requirements. Check with your dealer or system
administrator for more information.
You can turn on or turn off Wi-Fi by performing one of the
following actions.
• Press the programmed Wi-Fi On or Off button.
Voice Announcement sounds Turning On Wi-Fi or
Turning Off Wi-Fi.
•
Access this feature using the menu.
a. Press
to access the menu.
b. Press or to WiFi and press to
select.
c. Press or to WiFi On and press
to select.
Press to turn on Wi-Fi. The display shows
beside Enabled.
Press to turn off Wi-Fi. The disappears
from beside Enabled.
Connecting to a Network Access Point
When you turn on Wi-Fi, the radio scans and connects to a
network access point.
NOTICE:
You can also connect to a network access point
using the menu.
The WPA-Enterprise Wi-Fi network access points
are pre-configured. Check with your dealer or
system administrator to determine how your radio
has been programmed.
English
Send Feedback 453