User's Guide

Entering Front Panel Configuration
Mode
Follow the procedure to enter front panel programming
mode on your radio.
Long press at any time to return to the Home screen.
1
Press to access the menu.
2
Press or to Utilities. Press to
select.
3
Press or to Program Radio. Press
to select.
Editing FPC Mode Parameters
Use the following buttons as required while navigating
through the feature parameters.
• , – Scroll through options, increase/
decrease values, or navigate vertically.
• – Select the option or enter a sub-menu.
• – Short-press to return to previous menu or to exit
the selection screen. Long-press to return to Home
screen.
Wi-Fi Operation
This feature allows you to set up and connect to a Wi-Fi
network. Wi-Fi supports updates for radio firmware,
codeplug, and resources such as language packs and
voice announcement.
NOTICE:
This feature is applicable to XPR 5550e/XPR 5580e
only.
Wi-Fi
®
is a registered trademark of Wi-Fi Alliance
®
.
Your radio supports WEP/WPA/WPA2-Personal and WPA/
WPA2-Enterprise Wi-Fi networks.
WEP/WPA/WPA2-Personal Wi-Fi network
Uses pre-shared key (password) based authentication.
Pre-shared key can be entered by using the menu or
CPS/RM.
English
452 Send Feedback