User's Guide

The display shows In Range after the channel alias.
ARTS-Out-of-Range Alert
A tone sounds. The red LED rapidly blinks.
The display shows Out of Range alternating with the
Home screen.
NOTICE:
Check with your dealer or system administrator for
more information.
Over-the-Air Programming
Your dealer can remotely update your radio through Over-
the-Air Programming (OTAP) without any physical
connection. Additionally, some settings can also be
configured by using OTAP.
When your radio undergoes OTAP, the green LED blinks.
When your radio receives high volume data:
• The display shows the High Volume Data
icon.
• The channel becomes busy.
• A negative tone sounds if you press the PTT button.
When OTAP completes, depending on the configuration:
• A tone sounds. The display shows Updating
Restarting. Your radio restarts by powering off and on
again.
•
You can select Restart Now
or Postpone. When you
select Postpone, your radio returns to the previous
screen. The display shows the OTAP Delay Timer icon
until the automatic restart occurs.
When your radio powers up after automatic restart:
• If successful, the display shows Sw Update
Completed.
• If unsuccessful, the display shows Sw Update Failed.
See Checking Software Update Information on page 209
for the updated software version.
Selecting Third-Party Peripherals
Connection Modes
Follow the procedure to select one of the following third-
party peripherals connection modes:
• Motorola Solutions
• PC and Audio
• Data Accessory
English
Send Feedback 447